Orlando Carpet Cleaning
Orlando Carpet Cleaning
Some great info on getting carpets dry. We use several of these methods to dry the carpets we clean at Your Orlando Carpet Cleaning Services.
Let’s face it. One of the biggest reasons for customer dissatisfaction is carpets that are left wet to long after a professional cleaning, mrs. homemaker doesn’t win her socks wet she doesn’t want the kids or the pets tracking up the carpets and you Don’t want the possibility of her slipping and falling you don’t want reoccurring, stains spots coming back, wicking or browning.
These are all negative moments of truth. Rather, you want the carpets dry as fast as possible. You want customers to use you again month until our neighbors and friends, and you want to increase profits.
All this comes from getting the carpets dry as fast as possible. This is a positive moment, true – and I’m here – to show you 20 tips and tricks right now how to get the carpets dried as fast as possible tips. This are some great tips and we following several of them If you need cleaning services in Orlando,FL we can help.
1. Through 10, we’re back here by the truck tips. 10 through 20 will be inside, and we start with number 1 with an inline filter, namely the Devastator reason I like this is because I can run forward to the door.
I can grab 250 foot hoses, go to the door hook it up here and basically go ahead and put the blower inside of the home maximizing. My back end number two is check your water pressure, most professional cleaners clean around 300 to 500.
Anything above that you might be pressure washing the carpets, driving dirt and water down inside the backing, which he calls reoccurring. Spots, wicking and brownie. You don’t want that number three check for all leaks in the system.
You want to make sure and pull that all your hoses going through the waste bank, your pipes and your plumbing make sure there’s, no leaks. Imagine you’re, sucking water through a straw. It’s, got a hole in it and you’re.
Trying to drink a drink. You just can’t, get it up actually want to make sure you have the links on top of check. Your lids make sure that the gas meter in good shape measures the bear on their Commissioner sitting straight to maximize vacuum, along with checking their exhibition, that you check your blower culture routinely and what gets fogged up and restricts your bag.
Also, if you have a drop down culture, make sure you pull that out. Your wegs tank clean that too tip number four. Remove your one, two half-inch whip hose and run it’s. Alright, it’s, a bone pop it off.
Take that in there and press your vacuum, your special, a large of lowers number five is clean out your hoses. Once a month, you clean out your filter after every single job, your inline filter. What I’ll do is take a wet towel hook.
Up my back and learn through my inline filter turn the machine on. Let it go down through there and will dislodge anything that might be stuck in there. Do that once a month, then, once in every single job, pull out your filter and replace it, keep it several all on the truck because they restrict your vacuum.
If it’s blocked up our tip number six is to run the RPMs hires. The factory allows what this does is: keeps your vacuum to maximum. On top of it make sure that your belt, your tight, loose belt, call slippage, and that kills your back number seven get down inside your machine there and adjust that vacuum relief valve to the maximum amount you’re allowed lets off.
Of that you can put a free flow valve or a couple valve to really create a vacuum in verse. Number eight. Just when cut you heat up as high as it possibly go. Remember: hot water not only cleans faster, but also evaporates fast number, nine check.
All your tools make sure they’re functioning properly, especially your walls make sure they’re, not clogged. When air a thread. This reduces from attack you every machine to make sure that you’re, sealed they’ll seal gasket, scream good shape, change regularly and capable clean, also hitting the sprays, and it has a general note on your wall, whether it’s on your last waiter make sure they’re in good shape.
Number 10 don’t pull out anymore. Vacuum goes in. They need also make sure that you don’t need it behind truck up hold up. This causes resistance plus, when we’re working out of a house don’t, let get tangled up shorten it.
Any Congress you possibly can keep the hose and string to reduce resistance. Also, I recommend not using a live back in real. Okay, the remainder of the tips are going to be inside to home here’s tip number 11.
The first thing I’d like to do is: adjust the heating and air conditioning, especially in the summertime. What happened in Ursa, mini class will cut the air conditioner off and we introduced a ton of vapor inside of the home when we go through our hot water extraction.
That being the case, what you want to do is going to just the AC. Get it cooled down a little bit, so it acts like a dehumidifier and sucks the moisture out of the home that helps speed up your dry times.
Number 12 make sure you can mix up your pre spreads properly according to label. Also, don’t over apply it. It’s, a wasted chemical and it’s. Also, a waste of money plus is hard to get out of the carpets and let’s face it.
So controlled outer side of the carpets tip, hope you get out and causes those wicking problems, and I was talking about also when you go to spray just spray it lightly. Don’t spray any more than that’s necessary.
If you do have to spray some more in a heavy traffic pattern, make sure you take that your time to rinse that out number 13 make sure you do a lot of dry strokes while using a log or a rotary. You want to do a good amount of dry strokes.
Now, if you clean one wet stroke, always do at least two dry strokes afterwards, if you do the same thing with a rotary machine after you clean go ahead and hit a dry stroke with the rotary and on top up, you can take your one cut in The corners and redress rugged number fourteen is excessive.
Foam. Excessive foam is a vacuum killer. You get a foam inside your hoses inside your waste tank and down goes your vacuum. So I like to kiss some crystal powder and do foam rolling truck, especially when other prior cleaners have been there or they use do-it-yourself machines, sprinkle it out and get the plate number 15.
If you & # 39, re, going to use slides, make sure that you slow down take your time move slowly, because the tennis with Teflon is to move fast. Yes, it helps your body. Sometimes it makes the carcass dry quicker.
But if you don’t clean as well, by taking your time, you’re, going to leave a lot of water and a lot of you charge it behind. I also highly recommended use some type of rotary machine and go ahead and put the body head on there and pre agitate the carpet.
Well, number 16: when you’re using a wand, keep your wand struck short. I recommend 3 to 4 feet. Also, Michigan cut the water off at the end of the stroke, so it does a puddle down there, because that’s, going to be really hard to dry.
Also, I recommend go halfway across the room. Then work your way back with a dry stroke. Come back with another dry stroke then do the other half of the room, don’t? Do five ten foot, strokes or don’t do across the whole room.
What you’re going to do is allow the moisture too much time to seep down into the tube back at the bottom of the carpet there, and you’re, going to have a problem with over wetting drying times and all the Problems I mentioned like reoccurring, stains, browning and wicking.
You don’t want that number 17. Take the time to post bond, it would absorb it. Hit get your rotor out hook up the body head, put on an absorbent pad and go over that and get a lot of excess residue, and even a little bit of dirt.
It might be left behind. 18 is go ahead and burp the house now make sure it’s, weather permitting and the pets can’t get out. What you can do is go ahead, prop open the door, make sure the screen is shut, go up until the weather, the other end and let the air move fruit.
You’d, be surprised how much humidity you’re, adding to the house when you’re cleaning, the car number 19 get air moving through the house. I don’t care if you have to use bathroom fans, ceiling, fans or air movers, get air moving, get those carpets.
Job number 20 is use our spray vendors. This is a revolutionary product by truck mount forums and what it does is it prevents spots when coming back. It prevents wicking and reoccurring, stains and browning.
Also, all you do is take and let mist on a light amount onto the carpet and just go that’s. All you do now. Let’s just suppose. For some reason, a spot or stain comes back or you miss spraying. It with this just come back mist it with this, and the spot will be gone and you can stand up to a great spot warranty.
Well, hopefully, you now see there’s a whole lot more to getting carpets, dry and clean than you thought. What I’m clean, I like that name by the way, if you think about it, when you apply all these principles, you’re, going to notice that your customer referrals and your profits are going to skyrocket.
Your customer satisfaction will be where it never once before, and you’re going to build lifetime clients and that’s. What it’s all about well hope you enjoyed this video, definitely come to truck mail forms where we have hundreds of similar types of videos like this, I’m.
tips courtesy of Rob Allen with truck Nam forms have a great day. Your Orlando Cleaning Services
If you need cleaning services in Orlando we can help we provide residential cleaning, office cleaning, vacation rental cleaning and housekeeping services in Orlando, FL